-
Naraku Performance Cylinder for 100cc AC Minarelli
- Upgrades to 113cc
- Cylinder Bore: 55mm
- Cylinder Sleeve Outer Diameter: 59.2mm
- Wrist Pin Diameter: 14mm
- Cylinder Stud Spacing (Diagonal): 75mm
- Exhaust Port Diameter: 26mm
- Exhaust Stud Spacing: 48mm
- Overall Height of Cylinder: 85mm
$112.99 Add to cart -
Naraku Minarelli 50 Crank Bearing & Seal Kit
Includes:
- 6204 C3 Bearings – Outer Diameter: 47mm, Inner Diameter: 20mm, Width: 14mm
- 20*42*8 Seal
- 20*30/33*6 Seal
Made in Taiwan
$29.99 Add to cart -
Naraku Performance Intake for Minarelli 2-Stroke
- Fiberglass Reeds
- Inner Diameter of Intake Side: 27mm
- Bolt Hole Spacing: 46.5mm
- Includes Mounting Hardware and Gaskets
$77.99 Add to cart -
Naraku 52.4mm Performance Cylinder & Head Kit
- Upgrades to 89.3cc
- Cylinder Bore: 52.4mm
- Cylinder Sleeve Outer Diameter: 54.4mm
- Wrist Pin Diameter: 13mm
- Total Piston Height: 36.3mm
- Compression Height (from center of wrist pin hole to top edge of piston): 20mm
- Non-emissions style head
- Intake valve: 23mm
- Exhaust valve: 20mm
- Intake Port Diameter: 20.8mm
- Exhaust Port Diameter: 18.7mm
- Uses Short 64mm Valve Stems
$242.99 Add to cart -
Naraku Performance CDI for 50cc 2-Stroke Scooters
- 5 Pin Plug
- Length: 2.25 inches
- Width: 1 inch
- A/C
- Made in Taiwan!
$17.99 Add to cart -
Naraku 47mm Piston Kit for QMB139
- Piston Diameter: 47mm
- Wrist Pin Diameter: 13mm
- Total Piston Height: 34.1mm
$33.99 Add to cart -
Naraku Variator Control Shims for Piaggio 2-Stroke
- For Use With 21mm Variator Boss
- Includes 10 each of .1mm, .2mm and .5mm Shims
$7.49 Add to cart -
Naraku Variator Control Shims for CPI 2-Stroke
- For Use With 22mm Variator Boss
- Includes 10 each of .1mm, .2mm and .5mm Shims
$7.49 Add to cart -
Naraku Variator Shims for Minarelli 2-Stroke
- For Use With 18mm Variator Boss
- Includes 10 each of .1mm, .2mm and .5mm Shims
$7.99 Add to cart -
Naraku Performance Intake Spacer for QMB139
- Inner diameter tapers from 24mm down to 21mm
- Includes o-ring
- 11mm thick
$20.49 Add to cart -
Naraku 52.4mm Piston Kit
- Wrist Pin Diameter: 13mm
- Total Piston Height: 36.3mm
- Compression Height (from center of wrist pin hole to top edge of piston): 20mm
$52.99 Add to cart -
Naraku 18/36 Gear Set for GY6
- 35% Taller Gearing
- Recommended For Use With A Big Bore Kit
$67.99 Add to cart -
Naraku Gasket Set for 52.4mm Cylinder Kit
- For Use With Naraku 52.4mm Cylinder Kit
$18.99 Add to cart -
Naraku 70cc Performance Cylinder for AC Minarelli
- Upgrades to 70cc
- Cylinder Bore: 47mm
- Cylinder Sleeve Outer Diameter: 50.5mm
- Wrist Pin Diameter: 10mm
$79.99 Add to cart -
Naraku Variator Control Shims for QMB139 50cc
- For Use With 20mm Variator Boss
- Includes 10 each of .1mm, .2mm and .5mm Shims
$7.49 Add to cart -
Naraku Performance Intake for Honda Elite 2-Stroke
- Fiberglass Reeds
- Inner Diameter of Intake Side: 30mm
- Diagonal Bolt Hole Spacing: 62mm
- Includes Mounting Hardware
$87.99 Add to cart