-
Naraku QMB139 Super Transmission Kit Eco
- Roller Weight Size: 16x13mm (6g)
- Variator Outer Diameter: 88mm
- Clutch Drum Number of Splines: 22
- Clutch Drum Spline Inner Diameter (peak to peak): 11.10mm
$132.99 Add to cart -
Universal Parts 24 Volt 5.0 Amp XLR HP8204B Battery Charger
- Model: HP8204B
- Input: 115/230 VAC, 50/60Hz
- Output: 24 VDC, 5.0A
$132.99 Add to cart -
Bando CVT Drive Belt 977-24.8-30
- Length: 977mm
- Top Width: 24.8mm
- Groove Angle: 30°
- Made in Japan
$132.99 Add to cart -
Universal Parts Blind Bearing & Bushing Remover Set
- Includes 30, 25, 20, 17, 15, 12, 10, and 8mm Collets
- 2 Pound Slide Hammer
- Crossbar Type Shaft Allows For Easy Collet Removal
- Made In Taiwan
$132.99 Add to cart -
Dayco Aramid Drive Belt 916-29.8 – Yamaha Majesty 400
- Length: 916mm
- Top Width: 29.8mm
- Made in Italy
$131.99 Add to cart -
NHRC 220mm Rotor and Bracket Set – Yamaha Zuma 50
- NHRC Part FD-002-01
- Anodized Gold Center
- Includes 220mm Rotor and Caliper Bracket
- 6 Button Rotor Resists Warping
- Does Not Include Mounting Hardware
- Two M8-1.25 x 25 bolts are needed for the caliper adapter. Please see related items.
$127.99 Read more -
Ban Jing Performance Shock – 240mm
- Overall Length: 260mm (10.25″)
- Mounting Distance (eye to clevis): 240mm (9.5″)
- Mounting Hole Diameter: 10mm
- Thread Size: M8x1.25
- Adjustable
- Offset Shackle
- Width of Upper Eye Mount: 20mm
- Height of Upper Eye Mount: 55mm
- Width of Spring: 60mm
- Made in Taiwan
$127.99 Add to cart -
Ban Jing Ruckus Low Down Shock – 230mm
- Overall Length: 250mm (9.75″)
- Mounting Distance (eye to clevis): 230mm (9″)
- Mounting Hole Diameter: 10mm
- Thread Size: M8x1.25
- Adjustable
- Offset Shackle
- Width of Upper Eye Mount: 20mm
- Height of Upper Eye Mount: 45mm
- Width of Spring: 60mm
- Made in Taiwan
$127.99 Add to cart -
SSP-G GY6 58mm Cylinder Head
- Exhaust Valve Diameter: 23mm
- Intake Valve Diameter: 27.75mm
- Exhaust Port Diameter: 26.5mm
- Intake Port Diameter: 27.5mm
- Please Note: The threaded exhaust flange holes are only 10mm deep on this head. You may need to trim exhaust studs or use bolts for a proper seal.
$127.99 Add to cart -
SSP-G GY6 61mm Cylinder Head
- Exhaust Valve Diameter: 23mm
- Intake Valve Diameter: 27.75mm
- Exhaust Port Diameter: 26.5mm
- Intake Port Diameter: 27.5mm
$127.99 Add to cart -
Naraku 42mm Performance Cylinder Kit for SYM
- Upgrades to 63.7cc
- Cylinder Bore: 42mm
- Cylinder Sleeve Outer Diameter: 45.7mm
- Wrist Pin Diameter: 10mm
- Total Piston Height: 33mm
$127.99 Add to cart -
Naraku 47mm Performance Cylinder Kit
- Upgrades to 72cc
- Cylinder Bore: 47mm
- Cylinder Sleeve Outer Diameter: 53.1mm
- Wrist Pin Diameter: 13mm
- Total Piston Height: 34.1mm
$127.99 Add to cart -
Universal Parts 13″ Wheel Set for 150cc and 125cc GY6 Scooters
Front Rim
- Disc Brake
- Silver Painted with Polished Lip
- Size: 13×3.50
- Bolt Hole Thread Size: M8x1.25
- Includes 24*18*37
- Hub Width: 128.5mm
Rear Rim
- Drum Brake (129mm Inner Diameter)
- Silver Painted with Polished Lip
- Size: 13×3.50
- Number of Splines: 19
- Hub Depth: 48mm
- Inner Diameter (splines peak to peak): 18mm
$127.99 Add to cart -
Universal Parts 24 Volt 4.0 Amp On-Board Battery Charger for Rascal
- Model: PF2404SL
- Input: 100-240 VAC, 50/60Hz, 2.2-1.1A
- Output: 24 VDC, 4.0A
$127.99 Add to cart -
Arreche Carburetor for Kymco and Genuine – 19mm
- Air Filter Mount: 34.75mm
- Intake Bolt Spacing: 42mm
- Motorside Inner Diameter: 19mm
- Stock Electric Choke Can Be Used
- Kymco Models May Require Modification to The Stock Throttle Cable
- 60 Main Jet Installed, Comes With Additional 90
$127.99 Add to cart -
Polini Drive Belt for Vespa GTS 250/300 835×20.7×28
- Length: 835mm
- Top Width: 20.7mm
- Groove Angle: 28°
- Made in Italy
$127.99 Add to cart