-
- Made in the U.S.A.
- Fits 8mm mirror threads
- .150 (3.8mm) Lucite Acrylic windshield
- Includes anodized aluminum mounts and powder coated steel hardware for left and/or right handed threads
- Click Here For Measurements
-
- Koso Part FA623002
- Includes 6 Clutch Springs, 5 Clutch Pads & 4 Clutch Plates
- Made in Taiwan
-
- Made in the U.S.A.
- Dimensions: 15″ (height) x 16.5″ (width)
- Fits 8mm mirror threads
- Mounts to mirrors up to 18 inches apart
- .150 (3.8mm) Lucite acrylic windshield
- Includes anodized aluminum mounts and powder coated steel hardware for left and/or right handed threads
-
- Overall Length: 345mm (13.75″)
- Mounting Distance (eye to eye): 325mm (12.75″)
- Mounting Hole Diameter: 10mm
- Thread Size: M8x1.25
- Adjustable
- Nitrogen Charged
- Made in Taiwan
-
- Head Pipe Bolt Hole Spacing: 49.5mm
- Head Pipe Inner Diameter: 19.5mm with restrictor removed. 13mm with restrictor in place.
- Includes Mounting Hardware and Instructional Booklet
-
- Banjo bolt thread size: M12x1.25
- Banjo bolt inner diameter: 6.5mm
- Includes block off fitting for using tapped engine cases without a cooler
- Made in Taiwan!
-
- Includes Slide Pieces
- Does Not Include Roller Weights
- Number of Splines: 15
- Drive Face Outer Diameter (A): 117.5mm
- Boss Inner Diameter (C): 16mm
- Boss Outer Diameter (B): 20.9mm
- Boss Length: 48mm
- Ramp Plate Inner Diameter Valley to Valley (D): 16mm
- Ramp Plate Inner Diameter Peak to Peak (E): 14.2mm
-
- Overall Length: 270mm (10.75″)
- Mounting Distance (eye to eye): 252mm (10″)
- Mounting Hole Diameter: 10mm
- Thread Size: M8x1.25
- Adjustable
- Offset Shackle
- Nitrogen Charged
- Made in Taiwan
-
- Exhaust Valve Diameter: 23mm
- Intake Valve Diameter: 27.75mm
- Exhaust Port Diameter: 26.5mm
- Intake Port Diameter: 27.5mm
- Overall Height: 60mm
-
- Includes Drilled and Friction Enhanced Clutch Bell
- Clutch Bell Inner Diameter: 112mm
- Pulley Outer Diameter: 115mm
- Clutch Inner Diameter: 12mm
- Number of Splines: 16
- 1500RPM Clutch Springs
- 1500RPM Torque Spring
-
- Upgrades to 81.3cc
- Cylinder Bore: 50mm
- Cylinder Sleeve Outer Diameter: 54mm
- Compression Height of Piston: 20mm
- Cam Hole Diameter: 6.5mm
-
- Gloss white with a light pearl finish
-
- Overall Length (muffler): 19 inches
-
- Air Filter Mount: 34.75mm
- Intake Bolt Spacing: 42mm
- Motorside Inner Diameter: 21mm
- Stock Electric Choke Can Be Used
- Kymco Models May Require Modification to The Stock Throttle Cable
-
- Clutch Bell Inner Diameter: 107mm
- Clutch Bell Outer Diameter: 115mm
- Clutch Inner Diameter: 12mm
- Uses 6901 RS bearing
- Number of Splines (clutch bell): 22
- Splined Inner Diameter (peak to peak): 11mm
- Splined Inner Diameter (valley to valley): 12mm
- Adjustable Drive Sheave
- 1500 RPM Torque Spring
- Made in Taiwan
-
- Clutch Bell Inner Diameter: 107mm
- Clutch Bell Outer Diameter: 115mm
- Clutch Inner Diameter: 12mm
- Uses 6901 RS bearing
- Number of Splines (clutch bell): 22
- Splined Inner Diameter (peak to peak): 11mm
- Splined Inner Diameter (valley to valley): 12mm
- 1500 RPM Torque Spring
- 1000 RPM Clutch Springs
- Made in Taiwan
