-
- Overall Length: 20 inches
-
- Includes: Variator, Ramp Plate, Slides, Variator Boss and Shim, and 16×13 Roller Weights in 5.6g and 7.7g
- 25 Degree Ramp Plate
-
- Length: 113mm (4.45 inches)
- Width: 58mm (2.28 inches)
- Height: 89mm (3.50 inches)
- “L” Polarity
- CCA (cold cranking amps): 102
- No More Dead Batteries – Holds Charge For 1 Year Without Maintenance
- Ultra Light – One Fifth The Weight of Lead Acid Batteries On Average
- Zero Sulfation For Longer Service Life
- Drop-In Replacement For Your OEM Battery
- Military Spec Carbon Composite Case
- Faster Cranking For Better Starts
- Super Fast Recharge Rate
- SAFE – No Explosive Gasses During Charge, No Lead, No Acid
- Environmentally Friendly – Just Discharge & Dispose
- Japanese Engineering
- 3 Year Warranty!
- Please Note: Shorai Batteries require a charging system output of 13.1 Volts or higher at idle, and must not exceed 15.2 volts at maximum output.
-
- STORE MODE for Maximum Battery Life During Long-Term Storage
- CHARGE MODE Charges, Balances & Performs Cell Diagnostics
- Retractable Hook to Hang from Grips, Frame Rails or Seat Straps
- 100V~250V 50/60Hz AC Input
- 2A Max Charge Rate
- Includes: Shorai LFX Charger, AC Power Cable, Battery Cable for LFX 12V, Charge Cable for LFX 12V
-
- Choose from 49cc, 110cc, or 125cc
- 49cc Cylinder Bore: 39mm
- 110cc Cylinder Bore: 52mm
- 125cc Cylinder Bore: 54mm
- 125cc Cylinder Stud Spacing: 69.5mm
-
- Bore: 57.4mm or 61mm, choose in the drop down menu.
- Overall Height: 90mm
- Cylinder Sleeve Outer Diameter: 61mm (57.4mm cylinder kit) or 65mm (61mm cylinder kit.)
-
- Horozontal Style
- Bore: 47mm
- 12mm Piston Pin
- Overall Height: 87mm
- Cylinder Sleeve Outer Diameter: 50.9mm
-
- Includes: Variator, Ramp Plate, Slides, Variator Boss and Roller Weights in 5.6g and 6.9g
-
- Outer Diameter: 102mm
- Overall Length: 18.5 inches
- Includes mounting hardware
-
- Outer Diameter (piston): 44mm
- Cylinder Sleeve Diameter 50mm
- Cylinder Bolt Spacing 65mm
-
- Includes: Variator, Ramp Plate, Slides, Variator Boss and 16×13 Roller Weights in 5.6g and 6.9g
- 25 Degree Ramp Plate
-
- Overall Length: 270mm (10.75″)
- Mounting Distance (eye to eye): 252mm (10″)
- Mounting Hole Diameter: 10mm
- Thread Size: M8x1.25
- Adjustable
- Offset Shackle
- Nitrogen Charged
- Weight Rating: 420lb (190kg)
- Made in Taiwan
-
- Outer Diameter : 117mm
- 2000 RPM springs
- Made in Taiwan!
-
- Tire Size: 2.50-10
- Uses #25H Chain
- Uses 6001-RS Bearings
- Uses 12mm Axle (included)
- Assembly Required
- 140mm Brake Rotor (included)
-
- Heidenau Brand
- Tubeless
- Size: 130/70-12
- Tread Pattern: K66
- Speed/Load Rating: 62P
- 584 lbs. @ 41 PSI
- Tread: 3 Plies Nylon
- Made in Germany
-
- Kenda Tire Size: 140/70-16
- Tread Pattern: K671
- Tubeless
- Aggressive Tread Design for Excellent Traction and Performance
- P-Rated for Speeds up to 93 M.P.H.
- Strong 6 Ply Rated Carcass
- D.O.T. Approved
