-
Polini Crankshaft for Horizontal Minarelli Engines
- 39.2mm Stroke
- Full Circle Crank
- Compatible with 10mm Wrist Pin
- Does Not Include Crank Bearings
- Includes Wrist Pin Bearing
$168.99 Add to cart -
EBC 250mm Rotor and Bracket Set – Honda Grom
- EBC Part OSX1183C
- Includes 250mm Rotor, Caliper Bracket, and Bracket Hardware
- Stainless Steel Rotor
- 6 Button Rotor Resists Warping
- Does Not Fit Honda Monkey
$171.99 Read more -
Tecnigas GP4 Exhaust for 4-Stroke Piaggio Scooters
- Head Pipe Bolt Hole Spacing: 40mm
- Head Pipe Inner Diameter: 18mm
- Includes Mounting Hardware and Instructional Booklet
$171.99 Add to cart -
SSP-G 54mm Minarelli Big Bore Kit
-
Wrist Pin Diameter: 12mm
-
Wrist Pin Length: 44mm
-
Fits 1PE50QMB Minarelli based engines with 12mm wrist pin
- Piston Diameter: 54mm
- Overall Height (cylinder): 102mm
- Takes stock 90cc (50mm engines) up to 54mm!
$172.99 Read more -
-
Ban Jing GY6 Ceramic Big Bore Kit – 58.5mm
- Bore: 58.5mm
- Overall Height (cylinder): 90mm
- Heat Resistant Ceramic Coating
- Nikasil Interior for Reduced Friction and Low Wear
$172.99 Add to cart -
SSP-G Minarelli 41.4mm Stuffer Crankshaft
- 41.4mm Stroke Stuffer Crankshaft
- Overall length: 9½ inches
- 17 Splines
- Flywheel Thread Size: M10x1.25
- Drive End Thread Size: M10x1.25
- Inner Diameter of Piston Pin Hole: 14mm
$172.99 Add to cart -
Dr. Pulley Yamaha SMAX 155 Over-Range Variator Kit
- Includes Slide Pieces
- Includes 21×12 – 10 Gram Roller Weights
- Drive Face Outer Diameter (A & F): 142mm
- Boss Inner Diameter (C): 16mm
- Boss Outer Diameter (B): 23.9mm
- Ramp Plate Inner Diameter Valley to Valley (D): 15.8mm
- Ramp Plate Inner Diameter Peak to Peak (E): 13.9mm
$172.99 Read more -
Polini Transmission Kit for Vespa 125cc 3V Scooters
- Includes: Variator, Ramp Plate, Slides, Variator Boss, 19×17 Roller Weights in 9g and 13.5, High Temp Grease, and a 35Kg Torque Spring.
$175.99 Read more -
SSP-G QMB139 Performance Transmission Kit
- 1500 RPM Spring
- Spring Inner Diameter: 49mm
- Spring Height: 105mm
- Roller Weight Size: 16x13mm (8g)
- Variator Outer Diameter: 87mm
- Clutch Drum Number of Splines: 22
- Clutch Drum Spline Inner Diameter (peak to peak): 11.10mm
- Sliding Clutch Plate Outer Diameter: 119mm
$177.99 Add to cart -
Airsal 70cc Cylinder and Head Kit for LC Piaggio
- Upgrades to 70cc
- Cylinder Bore: 47.6mm
- Aluminum Cylinder with Nikasil Chrome Lining
- Includes Aluminum Cylinder Head
- NOT compatible with Ditech fuel injected models
$177.99 Add to cart -
Tecnigas GP4 Exhaust for QMB139 50cc
- Head Pipe Bolt Hole Spacing: 50mm
- Head Pipe Inner Diameter: 19mm
- Includes Mounting Hardware, Gasket and Instructional Booklet
$177.99 Add to cart -
LeoVince TT Exhaust for Minarelli Clone 2-Stroke
- Head Pipe Bolt Hole Spacing: 50mm
- Head Pipe Inner Diameter: 21.5mm
- Removable Silencer
- Includes Mounting Hardware and Instructional Booklet
- Also Includes Roller Weights 3.5gr and Clutch Springs for Further Tuning
$177.99 Add to cart -
OKO Carburetor GY6 30mm Performance CVK
- Includes Accelerator Pump
- Air Filter Mount (outer diameter): 46mm
- Engine Mount (outer diameter): 36mm
- Main Jet: #126
- Idle Jet: #40 installed, comes with additional #38 and #42
$178.99 Read more -
Tecnigas Maxi 4 Exhaust for Kymco 125cc
- Head Pipe Bolt Hole Spacing: 50mm
- Head Pipe Inner Diameter: 19mm
- Includes Mounting Hardware and Instructional Booklet
- Does Not Include an Exhaust Gasket, Please See Related Items
- Fits Models with 12″ Wheels only!
$180.99 Add to cart -
Dr. Pulley CN250 Variator Kit
- Includes Instructions
- Includes Sliders
- Does Not Included Roller Weights
- Number of Splines: 21
- Drive Face Outer Diameter (A): 128mm
- Boss Inner Diameter (C): 17mm
- Boss Outer Diameter (B): 27mm
- Ramp Plate Inner Diameter (D): 17mm
- Fan Inner Diameter Peak to Peak (H): 15mm
- Fan Inner Diameter Valley to Valley (G): 16.5mm
$182.99 Add to cart -
Driven Racing Carbon SBK 1-1/8 Handlebars
- Slight Weight Savings Over Standard Aluminum Bars
- Beautiful Carbon Fiber Finish
- Euro SBK Bend Ideal for all Naked Motorbikes
- Overall Length: 29 inches
- 1 1/8″ Clamp Area Diameter
- 7/8″ Control Area Diameter
- Clamp Area : 127mm
- Width: 724mm
- Height: 76mm
- Rise: 51mm
- Sweep: 102mm
- Please Note: This is a Universal Fit Part; it may or may not fit without modification
- Made in USA
$182.99 Read more