-
Ban Jing +3.0mm GY6 Stroker Crank and Spacer Kit
- Overall Length: 285mm
- Flywheel Thread Size: M12x1.25
- Flywheel Thread Length: 16mm
- Drive End Thread Size: M12x1.25
- Drive End Thread Length: 16mm
- Inner Diameter (piston pin hole): 15mm
- Number of Splines: 19
- Main bearings included
- Cylinder Spacer Inner Diameter: 65mm
- Spacer For B-case engines only (57mm cylinder stud spacing)
- All Sales on Performance Items Final
$232.99 Add to cart -
SSP-G Honda Elite (Dio) 50 Gear Set
Small Gear
-
Overall Length: 58.75mm
Large Gear
-
Inner Diameter: 16.95mm
-
Thickness:15.35mm
$62.99 Read more -
-
Dr. Pulley Yamaha SMAX 155 Over-Range Variator Kit
- Includes Slide Pieces
- Includes 21×12 – 10 Gram Roller Weights
- Drive Face Outer Diameter (A & F): 142mm
- Boss Inner Diameter (C): 16mm
- Boss Outer Diameter (B): 23.9mm
- Ramp Plate Inner Diameter Valley to Valley (D): 15.8mm
- Ramp Plate Inner Diameter Peak to Peak (E): 13.9mm
$172.99 Read more -
Ban Jing 20×15 12g Roller Weights – Honda PCX
- Roller Diameter: 20mm
- Roller Width: 15mm
- Does not fit Ban Jing aftermarket variator for PCX!
$15.99 Read more -
SSP-G Minarelli Water Pump Stud
- Stud Length: 25mm
- Stud Thread Size: M6x1.00
$6.99 Add to cart -
RDR Replacement Reed Valve Assembly for Minarelli
- Metal Reeds
- Dimensions: 58.75mm x 52.75mm
- Overall Height: 39.5mm
- Made In Taiwan
$25.99 Add to cart -
SSP-G 50mm QMB139 Performance Cylinder Kit
We recommend that you use our QMB139 performance cylinder head (see Related Items) with this set as some stock cylinder heads will not fit.
- Upgrades to 80cc
- Cylinder Bore: 50mm
- Cylinder Sleeve Outer Diameter: 54.9mm
- Wrist Pin Diameter: 13mm
- Total Piston Height: 34.8mm
- Compression Height (from center of wrist pin hole to top edge of piston): 18.3mm
$119.99 Add to cart -
SSP-G Oil Cooler and Line Kit
- Banjo bolt thread size: M12x1.25
- Banjo bolt inner diameter: 6.5mm
- Includes block off fitting for using tapped engine cases without a cooler
- Made in Taiwan!
$122.99 Read more -
Ban Jing GY6 Performance Clutch Drum – 12 Spoke
- Number of Splines: 19
- Overall Inner Diameter: 125mm
- Overall Outer Diameter: 136mm
- Splined Inner Diameter (peak to peak): 13.5mm
- Splined Inner Diameter (valley to valley): 15mm
$38.99 Read more -
SSP-G 52mm QMB139 Big Bore Cylinder and Head Kit
- Upgrades to 88cc
- Cylinder Bore: 52mm
- Cylinder Sleeve Outer Diameter: 54.9mm
- Intake Valve Diameter: 23.5mm
- Intake Port Diameter: 21.5mm
- Exhaust Valve Diameter: 20.1mm
- Exhaust Port Diameter: 19mm
- Valve Length: 62.3mm (compatible with 64mm Short Valve Style Heads)
- Does not come with camshaft, please see Related Items
- Made in Taiwan
$227.99 Read more -
Forged Honda PCX Variator Drive Face
- Weight of Forged Drive Face: 112 Grams
- Number of Splines: 28
- Overall Outer Diameter: 116mm
- Splined Inner Diameter (peak to peak): 14.1mm
- Splined Inner Diameter (valley to valley): 15mm
- Made in Taiwan
$28.99 Read more -
Ban Jing Performance Variator Kit – Honda PCX
- Uses 20×12 Variator Weights! 12g Weights Included
- Weight of Forged Drive Face: 112 Grams
- Number of Splines: 28
- Overall Outer Diameter of Variator: 116mm
- Splined Inner Diameter (peak to peak): 14.1mm
- Splined Inner Diameter (valley to valley): 15mm
- Made in Taiwan
$65.99 Add to cart -
SSP-G GY6 241cc 4V Power Kit
- Cylinder Bore: 67mm
- Cylinder Height: 75.2mm
- Cylinder Stud Spacing: 57mm (“B Case”)
- Overall Left Crankcase Length: 20 inches
- Includes All Gaskets and Hardware
- Made in Taiwan
$1,902.99 Read more -
SSP-G GY6 232cc 4V Power Kit
- Cylinder Bore: 67mm
- Cylinder Height: 75.2mm
- Cylinder Stud Spacing: 57mm (“B Case”)
- Overall Left Crankcase Length: 20 inches
- Includes All Gaskets and Hardware
- Made in Taiwan
$1,702.99 Read more -
SSP-G GY6 Performance Transmission Kit
- Clutch: 120mm Outer Diameter. 1000RPM Springs Installed.
- Torque (Contra) Spring: 1000RPM. Overall Length: 115mm (4.5 Inches.)
- Clutch Bell: 125mm Inner Diameter. 137mm Outer Diameter. 19 Splines.
- Variator: 115mm Outer Diameter. Includes 12g Roller Weights. 157g Drive Face.
- All Components Made in Taiwan!
$217.99 Add to cart -
SSP-G GY6 63mm Big Bore Cylinder Kit
- Bore: 63mm
- Overall Height (cylinder): 90mm
$156.99 Read more