-
- Cylinder Bore: 67mm
- Cylinder Height: 75.2mm
- Cylinder Stud Spacing: 57mm (“B Case”)
- Overall Left Crankcase Length: 20 inches
- Includes All Gaskets and Hardware
- Made in Taiwan
-
- Cylinder Bore: 67mm
- Cylinder Height: 75.2mm
- Cylinder Stud Spacing: 57mm (“B Case”)
- Overall Left Crankcase Length: 20 inches
- Includes All Gaskets and Hardware
- Made in Taiwan
-
-
- Vendor Part Number: MC623000
- Cylinder Head Height: 14.2mm
- Upper Gasket Thickness: 0.25mm
- Piston Height: 19.5mm
- Cylinder Displacement: 169.21cc
- Squish: 1mm
- Cylinder Head Titration: 13.4cc
- Valve Clearance IN : 10mm, EX : 10mm
- Spark Plug Type NGK-5869ER9EH
- Camshaft Angle: 260
- Torque (max): 1.71
- Horsepower (max): 26.26
-
- 57mm “B-case” cylinder stud spacing
- Cylinder Bore: 63mm
- Overall Left Crankcase Length: 20 inches
- Made in Taiwan
-
- Cylinder Bore: 54mm
- Exhaust Port Diameter: 31mm
- Cylinder Height: 78mm
- Cylinder Skirt Outer Diameter: 57.5mm
- +3.0mm Crankshaft
- Includes All Gaskets, Crank Bearings and Seals, and Cylinder Studs
- Made in Taiwan
-
- Upgrades to 75.6cc Displacement
- Bore: 47mm
- Overall Height (cylinder): 71.5mm
- Piston Pin Outer Diameter: 10mm
- Overall Piston Height: 30mm
- Piston Compression Height: 16mm
- Includes Extra Head Gasket
- 3 Valve Head
- Intake Valve Diameter: 15.5mm
- Exhaust Valve Diameter: 16.5mm
-
- Premium Quality, Hand Inspected, QC Verified
- Style: Long case
- Engine Type: GY6 Single Cylinder 4-Stroke
- Cooling: Air Cooled
- Displacement: 149.6cc
- Cylinder/Piston: 57mm
- Starting: Electric/kick
- 8 Coil A/C Stator
- Output Shaft Length: 121mm
- Distance Between Mounting Points: 5 Inches
- Set Up For Rear Drum Brake: 125mm
- Set Up for PAIR Emissions System
- Includes Premium Bando Drive Belt & NGK Spark Plug
- Engine Oil: 0.75 Liters
- Gear Oil: 0.17 Liters (6 fl. oz.)
- Shipped Dry, Included Oil Not Installed – Do NOT Run Engine Without Adding Specified Amounts of Oil (Bel-Ray Oil Included)
- This Engine Only Ships to the Continental U.S.
-
- Premium Quality, Hand Inspected, QC Verified
- Output Shaft Length: 122mm
- Accommodates 12-13 Inch Wheel Size
- Set Up For Drum Brake
- Set Up for PAIR Emissions System
- 8 Pole A/C Stator
- 69mm Valves
- Includes Premium Bando Drive Belt & NGK Spark Plug
- Engine Oil: 0.8 Liters
- Gear Oil: 0.12 Liters (filling) and 0.10 Liters (changing)
- Shipped Dry, Included Oil Not Installed – Do NOT Run Engine Without Adding Specified Amounts of Oil (Bel-Ray Oil Included)
- This Engine Only Ships to the Continental U.S.
-
- Drive shaft to engine case length: 10″
- Set up for rear drum brake. Includes 105mm brake shoes
- For use with 10mm wrist pin size
-
- Premium Quality, Hand Inspected, QC Verified
- Output Shaft Length: 54mm
- CVT Cover (short case): 16 inches
- Set up for drum brake
- Set Up for PAIR Emissions System
- 69mm Valves
- 8 Pole A/C Stator
- Includes Premium Bando Drive Belt & NGK Spark Plug
- Engine Oil: 0.8 Liters
- Gear Oil: 0.12 Liters (filling) and 0.10 Liters (changing)
- Shipped Dry, Included Oil Not Installed – Do NOT Run Engine Without Adding Specified Amounts of Oil (Bel-Ray Oil Included)
- This Engine Only Ships to the Continental U.S.
-
- Machined From Aerospace Grade 6061-T6 Aluminum
- High Grade Hardware: Grade 12.9 or Higher
- Double Sealed Ball Bearings on All Pivots
- Aggressive (GP Style) Adjustable Foot Pegs with Engineered Break-o Point
- Standard/Reverse Shift
- 4 Different Peg Mounting Positions
- New Lightweight TT Design
- The Use of Blue Threadlock is Required on ALL Mounting Hardware!
- Includes Instructions
- Made in USA
-
- Overall Outer Diameter: 157mm
- Center Opening: 33mm (width), 36mm (height)
- 55 Degree Pillow Springs
- Includes Several Sets of Pillow Springs and Clutch Springs for Fine Tuning
- Reduces Clutch Slippage
- Improved Clutch Efficiency
-
- Machined From Aerospace Grade 6061-T6 Aluminum
- High Grade Hardware: Grade 12.9 or Higher
- Double Sealed Ball Bearings on All Pivots
- Aggressive (GP Style) Adjustable Folding Foot Pegs with Engineered Break-o Point
- Standard/Reverse Shift
- 4 Different Mounting Positions Up To 18mm Up and 18mm Back From New “0” Position
- New Lightweight TT Design
- The Use of Blue Threadlock is Required on ALL Mounting Hardware!
- Includes Instructions
- Made in USA
-
- Premium Quality, Hand Inspected, QC Verified
- Style: Short case
- Engine Type: GY6 Single Cylinder 4-Stroke
- Cooling: Air Cooled
- Displacement: 149.6cc
- Cylinder/Piston: 57mm
- Starting: Electric/kick
- 8 Coil A/C Stator
- Output Shaft Length: 58mm
- Set up for Rear Drum Brake
- Set Up for PAIR Emissions System
- Includes Premium Bando Drive Belt & NGK Spark Plug
- Engine Oil: 0.75 Liters
- Gear Oil: 0.17 Liters (6 fl. oz.)
- Shipped Dry, Included Oil Not Installed – Do NOT Run Engine Without Adding Specified Amounts of Oil (Bel-Ray Oil Included)
- This Engine Only Ships to the Continental U.S.
-
- Cylinder Displacement: 169.2cc
- Cylinder Material: Aluminum/Ceramic CoatedCylinder Overall Height: 90.5mm
- Piston Diameter: 61mm
- Piston Type: Forged
- Compression Ratio: 11.5 to 1
